Set values of multiple Blynk pins with one http request

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Set values of multiple Blynk pins with one http request

    Ive made this php script for my TeHyBug environmental data trackers,
    this script allows to set multiple Blynk pin values with a "single" request.
    TeHyBug provides multiple environmental values at once and can deliver this values with a single http request, unfortunately the Blynk api allows only to set only one Pin value per http request, this script solves the problem of setting multiple blynk pins with a single TeHyBug request.

    PHP Code:
    <?php
    /*
        This scripts submits multiple tehybug values to multiple pins at blynk, you can place it at any webhost which supports php, even a free host should work, just make sure that they have curl lib enabled.

        define the auth token below or add the token as auth_token=yourtokenvalue to the url,
        configure http GET request like this:
        http://tehybug.com/blynk/auth_token/tokenvaluegoeshere/?pins=V0,V1&values=%temp%,%humi%
        or
        http://domain.com/blynk.php?auth_token=yourtokenvalue&pins=V0,V1&values=%temp%,%humi%

        configure http POST request for your tehybug with post body like:
        [{'pin':'V0','value':'%temp%'},{'pin':'V1','value':'%humi%'},{'pin':'V2','value':'%qfe%'}]
        for multiple pins and values
        point the url to this script:
        http://tehybug.com/blynk/auth_token/tokenvaluegoeshere/
        or
        http://domain.com/blynk.php?auth_token=yourtokenvalue


        In case you want to receive push notification when some environmental parameters are below or above defined values you will have to add following parameters.
        Requires the notification widget

        For a GET request add to url:

        &push_over_pins=V0,V1&push_over_values=10.1,20.2
        this will send a push notification when pin V0 value is over 10.1 or pin V1 value is over 20.2
        full url example:
        http://tehybug.com/blynk/auth_token/tokenvaluegoeshere/?pins=V0,V1&values=%temp%,%humi%&push_over_pins=V0,V1&push_over_values=10.1,20.2
        or
        http://domain.com/blynk.php?auth_token=yourtokenvalue&pins=V0,V1&values=%temp%,%humi%&push_over_pins=V0,V1&push_over_values=10.1,20.2

        &push_below_pins=V2&push_below_values=20.2
        this will send a push notification when pin V2 value is below 20.2
        full url example:
        http://tehybug.com/blynk/auth_token/tokenvaluegoeshere/?pins=V2&values=%temp%&push_below_pins=V2&&push_below_values=20.2
        or
        http://domain.com/blynk.php?auth_token=yourtokenvalue&pins=V2&values=%temp%&push_over_pins=V2&push_over_values=20.2

        You can use push over and push below parameters at the same time.

        For a POST request the post body should look like:
        [{'pin':'V0','value':'%temp%', 'push_over':50,'push_below':5},{'pin':'V1','value':'%humi%'},{'pin':'V2','value':'%qfe%'}]

        this will send a push notification when the temperature value is over 50 or below 5 degrees


    */
    //for tehybug post
    if(!empty($_REQUEST['auth_token']))
    {
        
    $auth_token $_GET['auth_token'];
    }
    else
    {
        
    $auth_token '4ae3851817194e2596cf1b7103603ef8'// define your auth token here in case you dont add it to the url as auth_token=yourtokenvalue
    }
    if(!empty(
    $_REQUEST['pins']))
    {
        
    $pins_arr explode(','$_REQUEST['pins']);
        
    $values_arr explode(','$_REQUEST['values']);

        
    $push_pins = array();
        
    $push_over_pins_arr explode(','$_REQUEST['push_over_pins']);
        
    $push_below_pins_arr explode(','$_REQUEST['push_below_pins']);
        
    $push_over_values_arr explode(','$_REQUEST['push_over_values']);
        
    $push_below_values_arr explode(','$_REQUEST['push_below_values']);
        for(
    $i=0;$i<count($pins_arr);$i++)
        {
            
    $blynk_url 'http://blynk-cloud.com/'.$auth_token.'/update/'.$pins_arr[$i].'?value='.$values_arr[$i];
            
    curl_get($blynk_url);
            echo 
    '<br>';
            
    //optionally you can use file_get_contents instead of curl like:
            //file_get_contents($blynk_url);
            
    echo 'Pin <b>'.$pins_arr[$i].'</b> is set to <b>'.$values_arr[$i].'</b><br>';
            
    $push_pins[$pins_arr[$i]] = $values_arr[$i];
        }
        for(
    $i=0;$i<count($push_over_pins_arr);$i++)
        {
            
    $blynk_url 'http://blynk-cloud.com/'.$auth_token.'/notify';
            echo 
    $push_pins[$push_over_pins_arr[$i]];
            if(!empty(
    $push_pins[$push_over_pins_arr[$i]]) && $push_pins[$push_over_pins_arr[$i]] > $push_over_values_arr[$i])
            {
                
    curl_post($blynk_url,'Pin '.$push_over_pins_arr[$i].' value is over '.$push_over_values_arr[$i]); // send push notification
            
    }
        }
        for(
    $i=0;$i<count($push_below_pins_arr);$i++)
        {
            
    $blynk_url 'http://blynk-cloud.com/'.$auth_token.'/notify';
            if(!empty(
    $push_pins[$push_below_pins_arr[$i]]) && $push_pins[$push_below_pins_arr[$i]] < $push_below_values_arr[$i])
            {
                
    curl_post($blynk_url,'Pin '.$push_below_pins_arr[$i].' value is below '.$push_below_values_arr[$i]); // send push notification
            
    }
        }
    }
    else
    {
        
    $raw_data file_get_contents("php://input");
        
    $raw_data str_replace("'"'"'$raw_data);
        
    $json_data json_decode($raw_data,TRUE);
        foreach (
    $json_data as $data)
        {
            
    $blynk_url 'http://blynk-cloud.com/'.$auth_token.'/update/'.$data['pin'].'?value='.$data['value'];
            
    curl_get($blynk_url);
            echo 
    '<br>';
            
    //optionally you can use file_get_contents instead of curl like:
            //file_get_contents($blynk_url);
            
    echo 'Pin <b>'.$data['pin'].'</b> is set to <b>'.$data['value'].'</b><br>';

            if(!empty(
    $data['push_over']) && $data['push_over'] < $data['value'])
            {
                
    curl_post($blynk_url,'Pin '.$data['pin'].' value is over '.$data['push_over']); // send push notification
            
    }
            if(!empty(
    $data['push_below']) && $data['push_below'] > $data['value'])
            {
                
    curl_post($blynk_url,'Pin '.$data['pin'].' value is below '.$data['push_below']); // send push notification
            
    }

        }
    }

    function 
    curl_get($blynk_url)
    {
        
    $ch curl_init();
        
    curl_setopt($chCURLOPT_URL$blynk_url);
        
    curl_setopt($chCURLOPT_RETURNTRANSFERTRUE);
        
    curl_setopt($chCURLOPT_HEADERFALSE);
        
    $response curl_exec($ch);
        
    curl_close($ch);
        
    var_dump($response);
    }

    function 
    curl_post($blynk_url,$body)
    {
        
    $ch curl_init();

        
    curl_setopt($chCURLOPT_URL$blynk_url);
        
    curl_setopt($chCURLOPT_RETURNTRANSFERTRUE);
        
    curl_setopt($chCURLOPT_HEADERFALSE);

        
    curl_setopt($chCURLOPT_POSTTRUE);

        
    curl_setopt($chCURLOPT_POSTFIELDS'{
          "body": "'
    .$body.'"
        }'
    );

        
    curl_setopt($chCURLOPT_HTTPHEADER, array(
          
    "Content-Type: application/json"
        
    ));

        
    $response curl_exec($ch);
        
    curl_close($ch);

        
    var_dump($response);
        echo 
    $body.'<br>';
    }



    ?>
    it is also available at https://github.com/gumslone/tehybug
    Advertise your mobile site for FREE with AdTwirl

Working...
X